forfour.co.uk

Advanced search  

News:

Pages: [1] 2

Author Topic: It was a lovely morning to...  (Read 28690 times)

Brabs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1506
  • 2x forfour, 1x 451, 1x Lomax 223 - Devon
It was a lovely morning to...
« on: July 24, 2012, 11:09:02 AM »
... do an Interim oil and filter change on the Brab'. So, before it got too hot it was out with the ramps, socket set, gloves, rags, drainer can, filter, sump plug washer and oil. About 40 min's start to finish. Then shower, cup of tea and put my feet up for a while followed by the obligatory test blast 8). Job done ;).
Logged
Open Your Mind... to a smart.
I did, to a generation 1 forfour 1.1 with 'Passion', a Silver generation 1 forfour 'Brabus' Xclusive and a fortwo 451 'night orange' edition ;~)

funkydoodycool

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1710
  • Life's short and too hard like a body-building elf
    • funkydoodycool's website
Re: It was a lovely morning to...
« Reply #1 on: July 24, 2012, 11:34:33 AM »
Nice one, I'll be doing mine Thursday :)

What oil did you use?
Logged

------

Brabs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1506
  • 2x forfour, 1x 451, 1x Lomax 223 - Devon
Re: It was a lovely morning to...
« Reply #2 on: July 24, 2012, 12:03:07 PM »
Castrol Magnatec Fully Synth'. Got some a while back when Tesco were doing a good offer. Would like to have used EDGE but stupid price... and it's not like I rag it round the Nurburgring  8)

 :)
Logged
Open Your Mind... to a smart.
I did, to a generation 1 forfour 1.1 with 'Passion', a Silver generation 1 forfour 'Brabus' Xclusive and a fortwo 451 'night orange' edition ;~)

funkydoodycool

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1710
  • Life's short and too hard like a body-building elf
    • funkydoodycool's website
Re: It was a lovely morning to...
« Reply #3 on: July 24, 2012, 12:26:56 PM »
Good stuff so I hear. I've got a bottle of Mobil 1 ESP waiting to be used...
Logged

------

Problemchild

  • BRABUS Owner
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 10019
  • 100 smiles per gallon........... BRISTOL, UK
    • EVILUTION
Re: It was a lovely morning to...
« Reply #4 on: July 24, 2012, 02:39:40 PM »
good info there - where did you get your filter from??

JJ
Logged

Brabs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1506
  • 2x forfour, 1x 451, 1x Lomax 223 - Devon
Re: It was a lovely morning to...
« Reply #5 on: July 24, 2012, 06:09:17 PM »
From smart/MB Exeter. Mitsubishi branded... MD3222 508 (made in Austria). Probably not the cheapest but I was in the area and it saved faffing around. Including the sump plug washer which smart bizzarely call a 'Full Face Gasket' it came to just over £8. TBH I could have spent a couple of quid driving around.  ;)

 :)
« Last Edit: July 24, 2012, 06:14:46 PM by Brabs »
Logged
Open Your Mind... to a smart.
I did, to a generation 1 forfour 1.1 with 'Passion', a Silver generation 1 forfour 'Brabus' Xclusive and a fortwo 451 'night orange' edition ;~)

Problemchild

  • BRABUS Owner
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 10019
  • 100 smiles per gallon........... BRISTOL, UK
    • EVILUTION
Re: It was a lovely morning to...
« Reply #6 on: July 24, 2012, 06:28:16 PM »
excellent - on the czt site, they are talking about how the filter hangs down a bit low and have been fitting evo slim ones...

thoughts??

JJ
Logged

funkydoodycool

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1710
  • Life's short and too hard like a body-building elf
    • funkydoodycool's website
Re: It was a lovely morning to...
« Reply #7 on: July 24, 2012, 07:01:02 PM »
My filter sits pretty much flush with the bottom of the wheel arch, which I suppose is potentially a bit risky.

Wouldn't a thinner one either cause a restricted flow, or have to let bigger particles through?
Logged

------

13east

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
  • UK...somewhere
Re: It was a lovely morning to...
« Reply #8 on: July 24, 2012, 09:18:27 PM »
I counted 48 possible filters for the 1.3 when i cross referenced it a couple of weeks back.

For the 1.5 Brabus
http://fautoparts.com/parts-Oil-Filter---SMART-FORFOUR-1-5-BRABUS-454-034-10359-18576-auto-parts

MANN-FILTER

▷▷▷ Oil Filter
Nr art: W 811/80
EAN: 40 11558 72000 1
Oil Filter
Outer Diameter: 80 mm
Inner Diameter 1: 57 mm
Inner Diameter 2: 65 mm
Thread Size: M 20 X 1.5 mm
Height: 75 mm
Opening Pressure Bypass Valve: 1 mm


VALEO

▷▷▷ Oil Filter
Nr art: 586017
Oil Filter
Height: 74 mm
Thread Size: M 20x1,5 mm
Outer Diameter: 81,5 mm
Inner Diameter 1: 65,2 mm
Inner Diameter 2: 57 mm


KNECHT

▷▷▷ Oil Filter
Nr art: OC 230
EAN: 40 09026 03252 7
Oil Filter
�: 76 mm
Height: 65 mm
Thread Size: M20x1,5 mm
D2: 63 mm
Screw-on Filter


PURFLUX

▷▷▷ Oil Filter
Nr art: LS489A
EAN: 32 86061 75748 1
Oil Filter
Outer Diameter: 76 mm
Port Thread: M20x1,5 mm
Height: 74 mm


CHAMPION

▷▷▷ Oil Filter
Nr art: CR09/036
FLO-MAX Oil Filter
D1: 76 mm
D2: 61,5 mm
Height: 76 mm
Thread Size: M20 x 1.5 mm


CHAMPION

▷▷▷ Oil Filter
Nr art: F110/606
EAN: 50 10874 20510 9
(Cardboard box) Oil Filter
Screw-on Filter
Height: 76 mm
Outer Diameter: 76 mm
Inner Diameter: 61 mm
Thread Size: M20x1.5 mm


FRAM

▷▷▷ Oil Filter
Nr art: PH6811
EAN: 50 22650 21313 0
Oil Filter
Outer Diameter: 76 mm
Port Thread: M20x1,5 mm
Height: 80 mm


HENGST FILTER

▷▷▷ Oil Filter
Nr art: H13W01
EAN: 40 30776 00114 3
Oil Filter
Screw-on Filter
Outer Diameter: 81,5 mm
Seal diam.: 65 mm
Thread Size: M20x1,5 mm
Height: 74 mm


TECNOCAR

▷▷▷ Oil Filter
Nr art: R96
EAN: 80 17265 15096 0
Oil Filter
Outer Diameter: 76 mm
Port Thread: M20x1,5 mm
Height: 75 mm


FIAAM

▷▷▷ Oil Filter
Nr art: FT5447
EAN: 80 12658 02116 4
Oil Filter
Outer Diameter: 76 mm
Port Thread: M20x1,5 mm
Height: 80 mm


MAGNETI MARELLI

▷▷▷ Oil Filter
Nr art: 152071758725
EAN: 80 01063 52273 9
Oil Filter
Height: 85 mm
Thread Size: M 20x1.5 mm
D1: 77 mm
Screw-on Filter


MAPCO

▷▷▷ Oil Filter
Nr art: 61550
EAN: 40 43605 07985 5
Oil Filter
Screw-on Filter
Outer Diameter: 81 mm
Inner Diameter 1: 57 mm
Inner Diameter 2: 65 mm
Thread Size: M 20 x 1.5 mm
Height: 74 mm


JAPANPARTS

▷▷▷ Oil Filter
Nr art: FO-M01S
EAN: 80 33001 27636 7
Oil Filter
Screw-on Filter
Length: 86,5 mm
Outer Diameter: 68 mm
Fitted �: 63 mm
Inner Thread: M20 x 1,5 mm


VAICO

▷▷▷ Oil Filter
Nr art: V32-0018
EAN: 40 46001 37083 0
Oil Filter
Screw-on Filter
Height: 74 mm
�: 84 mm


CLEAN FILTERS

▷▷▷ Oil Filter
Nr art: DO 324
EAN: 80 10042 32400 4
Oil Filter
Screw-on Filter
D1: 77 mm
Thread Size: M 20 X 1,5 mm
Height: 85 mm


ALCO FILTER

▷▷▷ Oil Filter
Nr art: SP-934
Oil Filter
Screw-on Filter
Height: 75,5 mm
Outer Diameter: 78,5 mm
Thread Size: M20x1,5 mm


DENCKERMANN

▷▷▷ Oil Filter
Nr art: A210039
Oil Filter
Outer Diameter 1: 80 mm
Inner Diameter 1: 63 mm
Inner Diameter 2: 55 mm
Thread Size: M20X1.5 mm
Height: 76 mm


DENCKERMANN

▷▷▷ Oil Filter
Nr art: A210100
Oil Filter
Outer Diameter 1: 86 mm
Inner Diameter 1: 65,5 mm
Inner Diameter 2: 56,5 mm
Thread Size: M20X1.5 mm
Height: 102 mm


DENCKERMANN

▷▷▷ Oil Filter
Nr art: A210180
Oil Filter
Outer Diameter 1: 93 mm
Inner Diameter 1: 71 mm
Inner Diameter 2: 62 mm
Thread Size: M20X1.5 mm
Height: 79,5 mm


ASHIKA

▷▷▷ Oil Filter
Nr art: 10-M0-001
EAN: 80 33001 27636 7
Oil Filter
Screw-on Filter
Length: 86,5 mm
Outer Diameter: 68 mm
Fitted �: 63 mm
Inner Thread: M20 x 1,5 mm


MAHLE ORIGINAL

▷▷▷ Oil Filter
Nr art: OC 230
EAN: 40 09026 03252 7
Oil Filter
�: 76 mm
Height: 65 mm
Thread Size: M20x1,5 mm
D2: 63 mm
Screw-on Filter


COOPERSFIAAM FILTERS

▷▷▷ Oil Filter
Nr art: FT5447
EAN: 80 12658 06564 7
Oil Filter
Specification: Ex Coopers Z1142 mm
Outer Diameter: 76 mm
Port Thread: M20x1,5 mm
Height: 80 mm


IPS Parts

▷▷▷ Oil Filter
Nr art: IFL-3M01
IPS Parts Oil Filter
Height: 85 mm
Screw-on Filter
Fitted �: 63 mm
Inner Thread 1: 20x1.5 mm
Width: 70 mm


JAPKO

▷▷▷ Oil Filter
Nr art: 10M01
EAN: 80 33001 27636 7
Oil Filter
Screw-on Filter
Length: 86,5 mm
Outer Diameter: 68 mm
Fitted �: 63 mm
Inner Thread: M20 x 1,5 mm


MULLER FILTER

▷▷▷ Oil Filter
Nr art: FO96
EAN: 80 33977 10096 3
Oil Filter
Screw-on Filter
Outer Diameter: 84 mm
Inner Diameter 1: 65 mm
Inner Diameter 2: 57 mm
Thread Size: M20X1,5 mm
Height: 76 mm


KAISHIN

▷▷▷ Oil Filter
Nr art: C1050
Oil Filter
�: 0 mm
Outer Diameter: 0 mm
Logged

Brabs

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1506
  • 2x forfour, 1x 451, 1x Lomax 223 - Devon
Re: It was a lovely morning to...
« Reply #9 on: July 24, 2012, 10:37:05 PM »
Quote from: Problemchild on July 24, 2012, 06:28:16 PM
excellent - on the czt site, they are talking about how the filter hangs down a bit low and have been fitting evo slim ones...

thoughts??

JJ

Well, not sure what the problem is... something striking the filter and knocking it off? Has that ever happened to anyone? Guess it it is the air flow it acts like a mini oil cooler? Maybe a filter with fins on?

 :)
Logged
Open Your Mind... to a smart.
I did, to a generation 1 forfour 1.1 with 'Passion', a Silver generation 1 forfour 'Brabus' Xclusive and a fortwo 451 'night orange' edition ;~)

Problemchild

  • BRABUS Owner
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 10019
  • 100 smiles per gallon........... BRISTOL, UK
    • EVILUTION
Re: It was a lovely morning to...
« Reply #10 on: July 24, 2012, 11:00:11 PM »
shhhhh - giving away ALL my secrets :)

JJ
Logged

musmart

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 350
  • London
Re: It was a lovely morning to...
« Reply #11 on: July 24, 2012, 11:40:39 PM »
Quote from: Problemchild on July 24, 2012, 11:00:11 PM
shhhhh - giving away ALL my secrets :)

JJ

hahahaah JJ
act fast ideas are flowing quicker than action lol.
thats a very useful info. I need oil change soon too.
Logged

Problemchild

  • BRABUS Owner
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 10019
  • 100 smiles per gallon........... BRISTOL, UK
    • EVILUTION
Re: It was a lovely morning to...
« Reply #12 on: July 24, 2012, 11:49:50 PM »
ideas come faster than cash flow.....

JJ
Logged

musmart

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 350
  • London
Re: It was a lovely morning to...
« Reply #13 on: July 24, 2012, 11:57:14 PM »
Quote from: Problemchild on July 24, 2012, 11:49:50 PM
ideas come faster than cash flow.....

JJ
True that man
Logged

13east

  • Newbie
  • *
  • Offline Offline
  • Posts: 23
  • UK...somewhere
Re: It was a lovely morning to...
« Reply #14 on: July 25, 2012, 07:21:35 AM »
Are you not using Opie Oils ?

Very helpful and some good discount + offers for members.

(coopers filters tend to be quite stumpy)
Logged
Pages: [1] 2
« previous next »